Electronaut M63 Bedienungsanleitung PDF herunterladen (Seite 11)

USER’S MANUAL

Electronaut M63 Vacuum Tube Microphone/Instrument Preampliﬁer

E L E C T R O N A U T  C O M P A N Y

Helvetica neue condensed black

tracked like crazy, like 400 or something.

Usual logo is without concentric circles.

Website has the concentric circles.

AC MAINS (IEC) connector: The IEC line voltage connector provides a means for connecting the AC mains

supply voltage to the M63. Make sure the M63 is properly conﬁgured for the mains voltage you intend to use.

(See page 10 to conﬁgure the M63 for proper line voltages.) The IEC connector also houses the fuse, as well as a

tiny little drawer with a spare fuse. See page 14 for instructions on replacing the fuse.

IEC Power Inlet

Figure 3

INTERNAL SETTINGS AND ADJUSTMENTS

Conﬁguring the M63 for 115 or 230 volt operation

The AC mains voltage select switch is set at the factory prior to shipping based on the shipping address or upon

special request at the time of order. The standard M63 accommodates 120 volt, 60 Hz operation, as well as

230V, 50 Hz operation. DO NOT OPERATE THE M63 WITH THE LINE VOLTAGE SELECT SWITCH IN THE

WRONG POSITION.

To change the AC mains voltage conﬁguration, make sure the M63 is unplugged, then remove the top cover. With

a ﬂathead screwdriver or your ﬁngernail, slide the voltage select switch to the appropriate position. (See ﬁgure 1

for the location of the voltage select switch.)

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17

Keine Kommentare

Electronaut M63 Bedienungsanleitung Seite 11